Increase performance with a TechT TiPX Pistol MRT Bolt System!
The TECHT MRT (MASS REDUCTION TECHNOLOGY) Pro Series TPX Bolt has been engineered with efficiency and consistency as the most crucial design elements. TechT also added a soft touch face to the TiPX Bolt to significantly decrease ball breakage. TechT's MRT system minimizes excess weight by removing portions of the bolt which are not utilized. Our spiral cut pattern allow us to lengthen the channels of material to be removed, this results produce a very dynamic looking bolt. Players that upgrade to the MRT Pro Series TPX Bolt will see significant increases in efficiency and the elimination of ball breakage typically associated with the stock TPX bolt. The TECHT MRT Pro Series Bolt is made of a combination of aircraft grade aluminum and delrin, which results in a super light design. As with all of TechT's products it carries a Full Lifetime Warranty.
The TechT MRT Pro Series TPX Bolt utilizes the stock spring. It is not necessary to install the TPX Low Pressure Spring Kit when using an MRT Pro Series Bolt. In testing they found that changing to a different spring (lighter spring) caused issues with the bolt hitting the breech with too much force. TechT saw increases of 20-30 FPS when changing out the stock bolt for the MRT Pro Series Bolt. The tremendous increase in efficiency is due to the combination of the soft-touch face, which helps seal the off the barrel when fired, the tremendous change in weight, and a high flow face. This means more mags per cartridge! The sound signature is also greatly reduced when adding the MRT Pro Series Bolt.
TechT TiPX Pistol MRT Bolt System features:
- - Replaces your stock bolt
- - Uses stock main spring
- - Increases shots per CO2 cartridge
- - Reduces sound signature
