The Vision Impulse is outfitted with a brand new circuit board that will
have you ripping up the field. The new board allows you to easily
control the Vision Eye using a simple push button that is mounted on the
rear of the marker. A small blue LED embedded next to the on/off
button will blink one time per second when the eye is turned off and
when the eye is turned on it will blink a rapid five times a second.
The Vision Eye not only turns the eye on or off but also sets rate of
fire for the marker. When the eye is activated the Impulse shoots 20
balls per second!! If you decide to turn the eye off the rate of fire
drops down to 13.7 balls per second. This reduction in rate of fire is
meant to reduce ball breakage and misfires.
Another new feature
is how you can tune the gun. On the outside of the body there are two
adjustment buttons. The buttons control the dwell, or how long the
valve remains open each time the marker is fired. The higher the dwell
is set the longer the valve stays open, resulting in higher air flow to
the hammer.
Smart Parts has really set the Vision Impulse apart
from other markers of its kind. It comes fully decked out with a 12"
Progressive barrel, Max Flow Regulator, and an adjustable trigger.
Because this is a discontinued marker we cannot accept any return or exchange.
There are no products listed under this category.
