Proto SLG 08 & 09 Complete Factory Parts Kit

Rebuild your Proto SLG with this complete parts kit!

Features:

  • - Bleed button o-ring (20)
  • - Hyper3 body-inside o-ring (10)
  • - Hyper3 top cap o-ring (10)
  • - Bolt plunger o-ring (10)
  • - Hyper3 body swivel o-ring (20)
  • - Bolt tip, plunger o-ring (20)
  • - Hyper3 piston top cap o-ring (10)
  • - Bolt front bumper o-ring (20)
  • - Outer bolt o-ring (20)
  • - Back cap o-ring (20)
  • - 4-40 x 1/4 Trigger adjustment screw (10)
  • - 4-40 x 3/32 Trigger adjustment screw (10)
  • - 8-32 x 5/16 Solenoid lock set screw (10)
  • - 3 x 15 mm Sear pin (10)
  • - M2 x 10mm Microswitch, board screw (20)
  • - M2 x 5mm Board mounting screw (20)
  • - Trigger pin (20)
  • - Trigger spring block (2)
  • - Button (5)
  • - Sear spring (10)
  • - 4-40 x 1/8 BTN head eye plate screw (20)
  • - 8-32 x 3/8 BTN head grip frame mounting screw (10)
  • - 8-32 x 5/16 BTN head grip panel screws (10)
  • - Bolt back bumper o-ring (10)
  • - Hyper3 reg seat (5)
  • - Proto logo (2)
  • - Ball detent (20)
  • - Eye plate set (2)
  • - Trigger spring (10)
  • - Ring (2)
  • - Sear (2)
  • - Battery connecter (2)
  • - Micro switch harness (2)
  • - Eye wire harness (2)
  • - Circuit board (1)
  • - SLG Solenoid (1)
  • - Straight macro fitting (2)
  • - 90 Degree macro fitting (2)

    • There are no products listed under this category.